Publicidad
Idiomas disponibles
Idiomas disponibles
•
Maintenance and repairs must be carried out under the supervision of
specialists in the use of flammable refrigerants.
•
Under no circumstances shall potential sources of ignition be used in the
searching for or detection of refrigerant leaks. A halide torch (or any other
detector using a naked flame) shall not be used.
•
Do not apply any permanent inductive or capacitance loads to the circuit
without ensuring that this will not exceed the permissible voltage and current
permitted for the equipment in use. Replace components only with parts
specified by the manufacturer. Other parts may result in the ignition of
refrigerant in the atmosphere from a leak.
Information for areas with refrigerant pipes
•
Keep pipework to a minimum.
•
Take care not to damage the pipelines.
•
Appliances with flammable refrigerants may only be installed in a well-
ventilated room.
•
Comply with national gas regulations.
•
All mechanical connections must be freely accessible for maintenance
purposes.
•
Leak detection fluids are suitable for use with most refrigerants but the use of
detergents containing chlorine shall be avoided as the chlorine may react with
the refrigerant and corrode the copper pipe-work.
CAUTION
Fire hazard! This appliance contains the flammable refrigerant R32.
If the refrigerant is leaking and exposed to an external ignition
source, there may be a fire hazard.
EN
29
Publicidad
