Publicidad
Idiomas disponibles
Idiomas disponibles
2. Indoor installation bracket (Fig. 11, Fig. 12, Fig. 13)
•
Assemble the M8 bolts and fixed sheet metals in order.
•
Lift up the indoor installation bracket and face it to the machine.
•
Ensure the four screw holes at the bottom of the outdoor unit being
consistent with the holes of the indoor installation bracket.
•
Insert M8 bolts and fixed sheet metals into the 4 corner holes.
•
Align the M8 screw with the threaded recess on the bottom base of the
outdoor unit and screw in.
•
Before tightening the screw, screw in 1-2 threads by hand first, then tighten
the 4 screws evenly by tool. The torque is 12–14 Nm. (No more than 14 Nm)
•
The indoor installation bracket must be sleeved into the air duct foam.
•
Fix the foam with another cable tie at the installation bracket.
Figure 11
Figure 12
Figure 13
EN
39
Publicidad
