Norwood LumberMax HD38 Instrucciones Originales página 16

Install the female disconnect fitting (item
#8) to the other end of the hydraulic
hoses (item #10 labeled NOR006-0002).
Install a #8 SAE fitting (item #6) to each
hydraulic cylinder (item #4) (bottom
extract port) using Teflon fitting tape.
Then install the male disconnect fitting
(item #9) to the #8 SAE fitting. Do the
same for both cylinders.
Connect the hydraulic hoses (item #10
labeled NOR006-0002) to the cylinder
using the disconnect fitting.
EN–8