Manual Configuration - SMA SUNNY BOY 3.0-US Instrucciones De Instalación

7 Commissioning
Position Designation
B User information
C Configuration field
Procedure:
1. Select the configuration option Configuration with Installation Assistant.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
4. To save the settings to a file, select [Export a summary] and save the file on your computer,
tablet PC or smartphone.
5. To export all parameters and their settings, select [Export all parameters]. This exports all
parameters and their settings into an HTML file.
6. To correct settings you made, select [Back], navigate to the desired step, correct settings and
select [Save and continue].
7. Once all settings are correct, select [Next] in the summary.
☑ The start page of the user interface opens.

Manual configuration

You can configure the inverter manually by setting the desired parameters.
Procedure:
1. Select the configuration option Manual Configuration.
☑ The Device Parameters menu on the user interface will open and all available
parameter groups of the inverter will be displayed.
2. Select [Edit parameters].
3. Select the desired parameter group.
☑ All available parameters of the parameter group will be displayed.
4. Set the desired parameters.
5. Select [Save all].
☑ The inverter parameters are set.
60 SBxx-1SP-US-41-IA-xx-10
Description
Information about the current configuration step and the
setting options of the configuration step.
You can make settings in this field.
SMA Solar Technology AG
Installation Manual