Imetec Zerocalc PS1 2000 Instrucciones De Uso página 17

NOTE: The super-steam function can only be used at high temperatures, between the
position with the 3 dots and the maximum temperature position.
If the selected temperature is too low, water droplets may drip from the plate.
Switch the appliance OFF by pressing the ON/OFF switch (1).
When light (2) is OFF, it indicate that the appliance is no longer operating.
Unplug the power supply cable with plug (8) from the socket.
Wait for the product to cool completely before putting it away.
EMPTYING THE TANK
Switch the appliance OFF by pressing the ON/OFF switch (1).
When light (2) is OFF, it indicate that the appliance is no longer operating.
Unplug the power supply cable with plug (8) from the socket.
Wait for the product to cool down completely.
Open the water fill cover (9).
Turn the base of the appliance upside down so that all the water in the tank (6) flows out.
Close the water fill cover (9).
Put the appliance away.
NOTE: If the appliance is not to be used for several weeks, wait for the appliance to
cool down completely before emptying the water reservoir completely according to the
instructions in the relevant chapter.
When the appliance is switched on again, refill the reservoir as indicated in the relevant
chapter.
ZEROCALC ANTI-CALC SYSTEM
A special resin filter located inside the water reservoir decreases the water hardness and limits the
formation of limescale in the plate. The resin filter is permanent and is not replaced.
CLEANING
WARNING! Make sure the plug of the appliance is
disconnected from the socket and the soleplate has cooled
down completely before cleaning the iron.
Remove any starch deposits or residue on the surface of the base of the iron (11) with a damp cloth and
non-abrasive liquid detergent.
Avoid scratching the base of the iron (14) with steel wool or metal objects.
Clean plastic parts with a damp cloth.
Then wipe with a dry cloth.
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
END OF USE
MAINTENANCE AND STORAGE
EN
15