Midland H9 PRO Manual Del Usuario página 10

lighting conditions
11. Date & time: to set the data format and to adjust the date and time
12. Language: selects the menu language
13. Format card: to erase all data on the memory card
14. System: factory reset, system info, card info.
Reset: to reset the camera to factory settings
System info: shows information about the model, software and
date of the latest software upgrade.
Card info: displays the memory capacity and the remaining storage
space
PHOTO SETTINGS
H9 PRO must be set in Photo mode.
1. Photo resolution: 20Mp, 16Mp, 14Mp
2. Image quality: high/middle/low
3. ISO (light sensitivity adjustment): the higher the value, the higher
the sensitivity)
4. Long exposure: it makes the video lighter or darker
5. Metering:
Center metering: focus on the central spot
Multi metering: focus on the whole screen
6. Date stamp: it is displayed the data and time on the photo
16
RC-H9 PRO REMOTE CONTROL
H9 PRO is supplied with a remote control which is able to take photos
and record videos even without using the camera.
Photo button
Turn on H9 PRO by pushing the Power/Mode button.
Remote control functions
To take a photo: Press the Photo key (red key)
To start/stop recording: Press the Video key (grey key).
WATERPROOF CASE
H9 PRO is supplied with a waterproof case up to 30m.
Before submerging the camera with the case in water, check that the
case is fully functional.
Immerse the closed case without the camera inside in water and verify
there is no infiltraton. Then dry the case and pay attention not to move
the gaskets. Now you can insert the camera.
In the event of condensation during diving, we suggest you spraying an
anti-fog agent.
Video button
17