Danby MICROFRIDGE 4.5MF1R Manual Del Propietário página 4

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the screw hole covers from the top left
side of the cabinet. Remove the hinge cover and
the upper hinge from the top right side of the
cabinet.
2. Remove the freezer door from the appliance.
Remove the hinge hole cover from the top left
side of the door and place it in the hole on the
top right side of the door.
3. Remove the center hinge from the cabinet.
4. Remove the refrigerator door from the cabinet.
Remove the hinge hole cover from the top left
side of the door and place it in the hole on the
top right side of the door.
5. Remove the adjustable foot from the left side of
the cabinet. Remove the lower hinge from the
bottom right side of the cabinet. Remove the
hinge pin from the lower hinge. Flip over the
lower hinge and reinstall the hinge pin.
6. Install the lower hinge on the bottom left side
of the cabinet. Install the adjustable foot on the
bottom right side of the cabinet.
7. Install the refrigerator door on the cabinet. Install
the center hinge. Install the freezer door on the
cabinet. Install the upper hinge on the top left
side of the cabinet. Install the screw hole covers
on the top right side of the cabinet.
Note: Ensure that the rubber gaskets of the doors
are making a good seal with the cabinet all the way
around before tightening the screws.
1
2
3
4
5
6
7
3