Ego Power+ CS1400 Manual De Operación página 31

Proper Grip On Handles
Wear non-slip gloves for maximum
grip and protection.
With the saw on a firm, flat surface,
hold the saw firmly with both hands.
Always grasp the front handle with
the left hand and the rear handle
with the right.
The fingers should encircle the
handle, with the thumb wrapped
under the front handle (Fig. 18).
WARNING:
handed (cross-handed) grip, or any
stance which would place your body or
arm across the chain line.
WARNING:
trigger switch with your left hand and
hold the front handle with your right
hand. Never allow any part of your body
to be in the chain line while operating a
saw (Fig. 19).
Proper Cutting Stance (Fig. 20)
Both feet should be on solid ground,
with weight evenly spread between
them.
The left arm should be straight, with
the elbow locked. This helps to withstand the forces generated by kickback.
Your body should always be to the left of the chain line.
Never use a left-
Do not operate the
18
19
20
Chain line
56V LITHIUM-ION CORDLESS CHAIN SAW
Grip with thumb
below handle
Chain line
Straight Arm
Position
31