Publicidad
Idiomas disponibles
Idiomas disponibles
Chain saw does
not cut properly
Bar and chain
running hot and
smoking
Insufficient chain tension.
Dull chain.
Chain installed backwards.
Worn chain.
Dry or excessively stretched
chain.
Chain not in bar groove.
Check chain tension for over
tightened condition.
Chain oil tank is empty.
Debris in guide bar groove.
56V LITHIUM-ION CORDLESS CHAIN SAW
Readjust the chain tension, following
the section: "ADJUSTING THE
CHAIN TENSION".
Sharpen the chain cutters, following
the section: "HOW TO SHARPEN
THE CUTTERS".
Reinstall the saw chain, following
the section: "REPLACE THE BAR
AND CHAIN".
Replace the chain, following the
section: "REPLACE THE BAR AND
CHAIN".
Check the oil level. Refill the oil tank
if necessary.
Reinstall the saw chain, following
the section: "REPLACE THE BAR
AND CHAIN".
Re-tension the saw chain; see the
section: "ADJUSTING THE CHAIN
TENSION".
Filling bar and chain lubricant.
Clear the debris in the groove.
45
Publicidad
