Descargar Imprimir esta página

Ego Power+ CS1400 Manual De Operación página 37

Ocultar thumbs Ver también para CS1400:

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
WARNING:
parts may create a hazard or cause product damage.
WARNING:
power tool operation or when blowing dust. If the operation is dusty, also wear a dust mask.
WARNING:
chain saw before inspecting, cleaning, or performing maintenance. A battery operated tool
with the battery pack inserted is always on and can start accidently.
WARNING:
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
CLEANING
After each use, clean debris from the chain and guide bar with a soft brush. Wipe
the chain saw surface with a clean cloth moistened with a mild soap solution.
Remove the side cover, and then use a soft brush to remove debris from the guide
bar, saw chain, sprocket and side cover.
Always clean out wood chips, saw dust, and dirt from the guide bar groove when
replacing the saw chain.
When servicing, use only identical replacement parts. Use of any other
Always wear safety goggles or safety glasses with side shields during
To avoid serious personal injury, remove the battery pack from the
When cleaning the chain saw, DO NOT immerse in water or other liquids.
Do not at any time let brake fluids, gasoline, petroleum-based
56V LITHIUM-ION CORDLESS CHAIN SAW
37

Publicidad

loading