Publicidad
Idiomas disponibles
Idiomas disponibles
5. The tube assembly should be either hung level, or with a downward
slope away from the burner box not exceeding 1 in. for every 10 ft.
of tube.
FIG. 7
SWAGED TUBE
ON BOX
CLAMP
3 IN. ROUND TUBE
POSITION CLAMP
EVENLY
TUBE WELD
SEAM DOWN
NON-SWAGED
TUBE END
HANGER
TUBE WELD SEAM
OVAL TUBE HANGERS
THIS
ROUND TUBE TO OVAL TUBE CLAMP INSTALLATION
3 IN. ROUND CLAMP (CENTERED WITH BOLTS UP)
Owner's Manual • Oval Radiant Tube Heaters
Oval Radiant Tube Heaters
CLAMP
BOLTS UP
ROUND TUBE HANGER INSTALLATION
CLAMPS MUST BE CENTERED OVER
SWAGED AND NON-SWAGED ENDS OF
CLAMP
NOT THIS
OVAL TUBE
THIS
NOT THIS
TUBES
13
Publicidad
