PLAYKIN MERCEDES-BENZ GT4 Manual Del Usuario página 46

2 REAR WHEEL ASSEMBLY
1. The washer and nut are installed on the shaft, please remove them first. Sequence: gearbox + wheel + washer +
nut + wheel core cover. NOTE: gearbox installed on the shaft.
3 CONNECT ALL CABLES AND TEST
1. Connect the battery cable. Turn on the power switch. Press the switch forward, then press the pedal to test. If
the car can move properly, it's okay. If it cannot turn on or move forward, please reconnect all cables to avoid
bad contact. NOTE: Power plugs cannot be connected backwards.
46