Taurus ICE BRISE SILENCE Instrucciones De Uso página 9

TIMER FUNCTION
• The appliance's operating time can be controlled. (1-18h).
• To program the operating time simply select it using the
(b) button on the remote control, and then press the
increase button (c) or the decrease button (d) until the
desired time is reached.
• The time blinks on the display (4) during your selection.
• When the time stops blinking and appears the speed on
the display again, means it is programmed.
• Once the selected time has elapsed, the device will turn
off automatically.
OSCILLATION FUNCTION
• The oscillation function makes it possible to direct the flow
from the apparatus so that it automatically alternates over
a range of 75º.
• To activate this function, press the (e) button on the
remote control or (1) in the control panel.
• To deactivate this function, press again the swing button.
HEIGHT ADJUSTMENT
• The appliance height can be adjusted, it's just necessary
to unlock the lock nuts (L-O) place the appliance at the
desired height adding or removing tubes as needed and
lock again the nuts (L-O).
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off, using the on/off button.
• Unplug the appliance from the mains.
• Clean the appliance.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.