Descargar Imprimir esta página

Silvercrest SHH 150 B2 Instrucciones De Utilización Y De Seguridad página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
1. Introduction
Congratulations on the purchase of your new de-
vice. You have opted for a high quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Familiarise yourself with all operating and
safety instructions before you use the product. Use
the product only as described and only for the spe-
cified areas of use. When passing on the product,
please do not forget to hand over all the necessary
documents to the new user.
1.1 Intended use
This device is designed to heat and dry towels and
garments without a clothes hanger - for indoor use
only. Other uses or modifications to the product
shall constitute improper use and may result in risks
such as death, personal injury and damage. The
manufacturer accepts no liability for any damages
resulting from improper use. This product is not inten-
ded for commercial use.
1.2 Scope of delivery
1 Electric towel warmer
4 Decorative caps
4 Wall brackets
2 Aluminum stands
4 Surface protectors (pre-assembled)
8 Dowels
4 Phillips screws for mounting the aluminium stands
8 Phillips screws for mounting the wall brackets
1 Instruction manual
6
GB/NI/IE/CY/MT
ELECTRIC TOWEL WARMER
SHH 150 B2
1.3 Equipment
1 Decorative caps
2 Wall brackets
3 Timer button
4 On/off switch
5 Mains connection cable incl. plug
6 Aluminum stands
7 Surface protectors (pre-assembled)
8 Dowels
9 Phillips screws M3.5 x 12 mm for mounting the
aluminium stands
Phillips screws M4 x 30 mm for mounting the
10
wall brackets
1.4 Technical data
Power supply:
220-240 V ~ , 50 Hz
Rated power
consumption:
150 W
Dimensions:
Wall towel rail:
530 x 100 x 860 mm
Standing towel rail: 530 x 355 x 900 mm
Protection rating:
IP22
Protection class:
I

Publicidad

loading