Samsung NX58J5600S Serie Manual Del Usuario página 31

SettiNG tHe cLocK
The clock must be set to the correct time of day for the automatic oven timing functions
to work properly. The clock can be adjusted to show a 12-hour or 24-hour display. The
12-hour display is the default setting.
The time of day cannot be changed during a timed cooking, delayed start, self-cleaning,
or Sabbath function operation.
How to set the clock
1. Press the Clock pad.
2. Enter the current time in hours and minutes using the
number pads (e.g., 1, 3, 0).
The display will show the time of day, and the Start
indicator will blink.
3. Press the START/SET pad to set and start the clock.
The display will show the time of day, and the Start
indicator will turn off.
How to change between a 12-hour and 24-hour display
1. Press and hold the Clock and 0 pads for 3 seconds.
The display will show the present mode (e.g., 12Hr).
If one pad is pressed before the other, -- -- will appear
in the display.
Press the OFF/CLEAR pad and start again.
2. Press the 0 pad to toggle between the 12-hour and 24-
hour display setting.
12Hr or 24Hr will show in the display depending on your
selection.
3. Press the START/SET pad to change the clock display
mode.
operating the oven _31