Introduction; Scope Of Delivery - Parkside PKS 1500 A2 Instrucciones De Servicio Y Seguridad

Introduction

MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschine GmbH
Günzburger Straße 69
D-89335 Ichenhausen
NOTE:
According to the applicable product liability laws, the manu-
facturer of the device does not assume liability for damages
to the product or damages caused by the product that occurs
due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service techni-
cians,
• Installation and replacement of non-original spare parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due to
the non-compliance of the electric regulations and VDE
regulations 0100, DIN 57113 / VDE0113.
WE RECOMMEND:
Read through the complete text in the operating instructions
before installing and commissioning the device. The operat-
ing instructions are intended to help the user to become
familiar with the machine and take advantage of its applica-
tion possibilities in accordance with the recommendations.
The operating instructions contain important information
on how to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service life of
the machine.
In addition to the safety regulations in the operating instruc-
tions, you have to meet the applicable regulations that apply
for the operation of the machine in your country. Keep the
operating instructions package with the machine at all times
and store it in a plastic cover to protect it from dirt and mois-
ture. Read the instruction manual each time before operating
the machine and carefully follow its information. The machine
can only be operated by persons who were instructed con-
cerning the operation of the machine and who are informed
about the associated dangers. The minimum age requirement
must be complied with.
In addition to the safety notes contained in the present oper-
ating instructions and the special regulations of your country,
the generally recognized technical rules for the operation of
machines must be observed.
Legend of Fig. 1
1
Start button
2
Handle
3 Locking lever
4
Motor
5
Saw blade
6
Moving saw blade guard
7
Base
8
Table insert
9 Rotary table
10 Workpiece clamp
11
Housing / base joint
12
Dust bag
13
Stationary saw blade guard
PKS 1500 A2

Scope of delivery

Tool for stop rail – 3mm Allen
Technical Data
Dimensions L x W x
H mm
Rotary table ø mm
Table height mm
Saw blade Ø mm
Number of teeth
Speed rpm
Cutting speed m/s
Pivot range
Tilt angle
Double mitre
45° x 45°
Catch positions
Weight kg
Cross-cutting data
Max. cut depth
90°/45°
90°/90°
90°/45°
45°/90°
45°/45°
Drive
Motor V~/Hz
Rated input W
Technical changes reserved!
Mitre saw
Dust bag
Workpiece clamp
Tool for changing the saw
blade – 6mm Allen key
key
2 work piece supports
Support stand
2 batteries (AAA)
2 carbon brushes
Operating instructions
690 x 550 x 440
385 x 150
55
210/30/2,6/1,6
48
5000
55
2 x 45°
45°
left
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°
7,7
60 / 35 mm
120 x 60 mm
80 x 60 mm
120 x 35 mm
80 x 35 mm
220-240 / 50
S1 1200W
S6 25%* 1500W
GB/MT 37