Publicidad
Idiomas disponibles
Idiomas disponibles
PARTS DESCRIPTION
1.
Main body (Fan guard + Fan blade)
2.
Spring button
3.
Tube stand
4.
Straight tube
5.
Speed switch
6.
Control box
ASSEMBLY OF YOUR FAN
1. Take the main body of the fan and tube stand from the packaging.
2. Press and hold the spring buttons on both straight tubes; insert the main body into the tube stand. Make
sure the main body and tube stand are connected firmly with the spring buttons popped out.
3. Make sure the fan is correctly assembled as shown in the picture above.
OPERATING INSTRUCTIONS:
1.
Plug the power cord into a suitable socket.
2.
Turn the switch at the rear of control box to select at a speed 0= OFF, 1 = Low Speed, 2 = Medium speed, 3 =
High speed.
3.
Tilting Angles: By pushing the fan-guard, you can adjust the fan to the preferred elevation.
CLEANING
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2.
Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it
occasionally using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 50W
- 43 -
FN-108777.1 / FN-108777.2
Publicidad
