1.4 THE TERMINALS
The terminals are used as follows:
Figure 5: the terminals
Item
Cold point terminal (COM)
1
2
Hot point terminal (+)
2.1 FIRST USE
Insert the battery provided with the instrument as folows:
1.
Using a screwdriver, unscrew the four screws (a, b, c, and
d) holding the cover (item 1) on the back of the housing;
2.
Place the battery in its compartment (item 2); watch out
for the polarity;
3.
Screw the cover back onto the housing. Put the stand
back in place.
1
Figure 6: access to the battery
1
Function
2. USE
a
b
d
c
English
2
2
32 - 107