Medion X20 SW+ Manual De Instrucciones página 149

11. Cleaning and care
WARNING!
Risk of electric shock!
There is a risk of electric shock/short circuit
from live parts.
 Never immerse the robot vacuum and
mop or the charging station in water or
liquids!
 Only clean the appliance and all
accessories with a dry or slightly damp
cloth.
 Switch off the appliance completely and
pull the mains plug out of the socket
before cleaning and maintenance as well
as before assembly or disassembly of the
accessories.
 Do not use any solvents or caustic/
gaseous cleaning agents to clean the
appliance's surfaces.
 Wipe the surface of the robot vacuum
and mop and the station with a damp
cloth.
11.1. Cleaning the dust
container (robot vacuum
and mop)
Empty the dust container after each cleaning
process and clean it weekly.
 Press the release button for the dust
container with integrated water tank.
Fig. 22 – Removing the dust container
 Pull the dust container out of the robot
vacuum and mop.
 Press the release button on the dust
container.
 Open the dust container.
Fig. 23 – Emptying the dust container
 Empty the dust container over a suitable
dustbin.
 Rinse the filter, sponge filter and dust
container under running tap water.
The HEPA filter must not be rinsed out with
water.
 Dry the filter, sponge filter and dust
container thoroughly and allow all
parts to dry out completely in fresh air
for approx. 24 hours before using them
again.
11.2. Cleaning the dust
container (dust collector)
Clean the dust container of the dust collector
regularly and change the dust bag after one
month at the latest.
A
DE
FR
NL
ES
IT
EN
B
151