Make sure that the battery pack is
completely discharged before removing.
Switch off the appliance and disconnect
the mains adapter from the socket and
the mains cable from the appliance.
Loosen both screws on the bottom of the
robot vacuum cleaner and mop using a
Phillips screwdriver and open the battery
compartment.
Loosen the screws on the battery cover.
Open the battery cover.
Carefully remove the plug of the battery
pack from the socket.
Remove the battery.
Replace the old battery and fit the new
battery block in reverse order.
Dispose of the old battery pack in an
environmentally friendly manner (see "17.
Disposal" on page 157).
Close the battery compartment using
both screws.
If you have any queries regarding the
purchase or replacement of the battery,
please contact the Service Centre.
156
15. Technical
specifi cations
Robot vacuum and mop
Dust container
capacity:
Water tank
capacity:
WLAN range in
closed rooms:
Weight:
Dimensions:
Dust collector
Input:
Output:
Vacuum power:
Noise level:
Weight:
Dust bag
capacity:
Dimensions:
Battery pack
Type:
Model:
Manufacturer:
Battery voltage:
Battery capacity:
0.25 l
0.25 l
Up to approx. 10 m
Approx. 3 kg
Approx. 320 x 320 x
93 mm
220-240 V
,
50-60 Hz, 680 W
19 V
0.6 A
>20 kPa
Max. 72 dB (+/-5)
Approx. 2.7 kg
2.5 l
Approx. 320 x 240 x
165 mm
Lithium-ion battery
INR18650 MH1-4S1P
BYD Company
Limited, China
16.6 V
Rated 2900 mAh
Typical 3200 mAh