Trevi FLEX PLUS 90 4G Manual De Usuario página 31

• Replace the back cover.
Notes:
• Some card brands may not be compatible with the phone. The use an incompatible
memory may be damaged or the card memory itself.
• The appliance only supports memory formatted in FAT. If you enter formatted cards
differently the phone will ask you to reformat the memory card.
CHARGING THROUGH POWER SUPPLY:
1. With the device switched off, connect the USB type-C socket of the supplied cable to
the USB type-C socket (2) of the phone;
2. Connect the USB socket of the same cable to the supplied power adapter and plug the
power adapter into a standard wall outlet;
3. The device will light up to show "Recharging" for a few seconds and the LED (4) will
light up red;
4. When the battery is fully charged, pressing a button on the display will show "Battery
Charged" and LED(4) will turn Green.
CHARGING THROUGH "CHARGING CRADLE" (SUPPLIED)
1. Connect the USB type-C socket of the supplied cable to the USB type-C socket of the
base (24).
2. Connect the USB socket of the same cable to the supplied power supply and connect
the latter to a standard mains socket.
3. Place the switched-off phone inside the base with the secondary display facing front,
the display will show the battery icon with the charging phase for a few seconds and
the Led(4) will light up red.
4. When the battery is fully charged, pressing a button on the display will show "Battery
Charged" and LED(4) will turn Green.
Notes:
• Use only the mains adapter supplied, different power supplies may damage the battery.
• You can use the device even when it is charging, but, for longer life battery, not
4. Charging battery
31