BH FITNESS G6515 Manual Del Usuario página 10

Depending on the user pulse the
program will change the intensity of
the exercise,
decreasing it.
Note: The program does not control
the inclination of the treadmill, only
will change
inclination must be controlled by the
user.
iOS OPERATION
iPhone, iPad and iPod Touch).-
This monitor
Bluetooth module.
Turn Bluetooth to "ON" in settings on
the iOS device.
Download an App that supports the
FTMS protocol from the App Store
(ZWIFT, KINOMAP,...).
Open the App to run it. When
prompted by the App, select the
appropriate BH Module from the list
displayed on the device to pair.
ANDROID OPERATION
(compatible Android devices).-
This monitor
Bluetooth module.
Turn Bluetooth to "ON" in settings on
the Android device.
Download an App that supports the
FTMS protocol from Google Play
(ZWIFT, KINOMAP,...).
Open the App to run it. When
prompted by the App, select the
appropriate BH Module from the list
displayed on the Android device to
pair.
See compatible apps on the web:
www.bhfitness.com
Get your free
activation code at:
http://colectivos.bhonlinestore.
com/bh-by-kinomap/
increasing
the speed.
(compatible
has an integrated
has an integrated
BH by Kinomap
EMERGENCY STOP.-
For the user's maximum safety, this
and
unit is equipped with a safety key (H)
and a STOP button. The safety key (H)
must be slotted into its housing (I),
Fig.2, otherwise the machine will not
The
start.
When you are using the machine
always clip the cord on the safety key
to your clothing. Tugging on the cord
will pull the safety key out of its slot
and the machine will stop immediately.
To restart the machine simply put the
key back into the key slot.
Remove the safety key (I) whenever
the machine is not being used and
keep it out of children's reach.
Pressing the red button marked STOP
will also stop the unit immediately.
To restart it, press the button marked
START again.
PULSE MEASUREMENT.-
PULSE Hand-grip.
On this model the pulse rate is
measured by placing both hands on
the sensors (J), located on the
handlebar, as shown in Fig, 2.
After a few seconds a heart rate
reading will be displayed.
If both hands are not placed correctly
then the pulse function will not work.
TELEMETRIC PULSE
The monitor is equipped to receive
signals
measurement system.
The system comprises of a receiver
and a transmitter (chest band not
included).
This telemetric pulse rate system
takes precedence over the Hand-
grip pulse rate system when both
are used together.
10
RATE.
from a telemetric pulse