MESTIC SMART ADVENTURE MI-500 Instrucciones De Uso página 40

Overload protection:
Model
MI-500 / MI-1000 / MI-1500 /
MI-2000
MI-3000
Note: When the overload protection starts, the AC output will be recovered automatically at three
moments: after 5, 10 and 15 seconds. If all three recovery attempts fail, you need to restart the inverter
to recover the AC output.
Power
S=1.2Pe
(S: Output power; Pe: Rated
power)
S=1.5Pe
(S: Output power; Pe: Rated
power)
S=1.8Pe
(S: Output power; Pe: Rated
power)
S≥2Pe(Rated input voltage)
(S: Output power; Pe: Rated
power)
S=1.2Pe
(S: Output power; Pe: Rated
power)
S=1.5Pe
(S: Output power; Pe: Rated
power)
S≥1.7Pe
(S: Output power; Pe: Rated
power)
Status
The output is switched OFF
after 1 minute.
The buzzer beeps.
The red indicator flashes
slowly.
The output is switched OFF
after 30 seconds.
The buzzer beeps.
The red indicator flashes
slowly.
The output is switched OFF
after 10 seconds.
The buzzer beeps.
The red indicator flashes
slowly.
The output is switched OFF
after 5 seconds.
The buzzer beeps.
Red indicator flashes slowly.
The output is switched OFF
after 1 minute.
The buzzer beeps.
The red indicator flashes
slowly.
The output is switched OFF
after 10 seconds.
The buzzer beeps.
The red indicator flashes
slowly.
The output is switched OFF
after 5 seconds.
The buzzer beeps.
The red indicator flashes
slowly.