MSW Motor Technics MSW-SBBD-2800MAX Manual De Instrucciones página 46

• Screw 4 legs to the worktop using screws, 2 washers and
nuts. For now, tighten them only slightly.
IMPORTANT: the leg with the place for mounting the
ON/OFF switch should be mounted on the left side, i.e.
facing the blade height adjustment knob.
• Install the crossbars between the legs using other bolts
with washers and nuts. For now, tighten them only slightly.
• Pull the ON/OFF switch cable from the front through the
hole in the mounting base for the switch on one of the legs
and attach the switch using 2 self-tapping screws (f).
EN