Publicidad
Idiomas disponibles
Idiomas disponibles
•
Use the same procedure for cutting with the blade at an angle. If
you need to make a precise cut, you can additionally use a
protractor between the blade and the worktop.
3.3.6
Cutting small/narrow workpieces
For cutting small/narrow objects, use the included pusher,
•
which keeps the operator's hand at a safe distance from the
blade.
3.3.7
Cross cutting
When making cross cuts, use the holding pusher and move the
•
element to be cut along the set cross guide.
Always hold the part of the object to be cut, never the part that
•
will be cut off.
EN
Publicidad
