MSW Motor Technics MSW-SBBD-2800MAX Manual De Instrucciones página 48

• Screw the axle with the transport wheels to the legs on the
opposite side of the transport handles.
IMPORTANT: the mounted wheels should almost touch the
ground on which the unit is standing.
b) CUTTING BLADE AND BLADE GUARD
• With the saw blade and riving knife being pre-installed,
attach the blade guard to the riving knife.
IMPORTANT: for transport, the riving knife with the blade of
the cutting disc is fixed in the extremely low position. Before
installing the blade guard, make sure that the cutting disc is
raised so that the guard does not come into contact with the
blade during operation.
• Connect the socket in the guard to the slot in the riving knife
and tighten the locking screw/nut to make sure that the
guard is close to the blade, but still goes up/down slightly and
falls freely.
EN