Publicidad
Idiomas disponibles
Idiomas disponibles
• Connect the dust extraction hose first to the blade guard (c)
and the other end to the dust extraction connection at the
bottom of the table (d).
• Slide the dust extraction hose into the bracket attached to
the corner of the worktop.
NOTE: The use of a dust extraction system is strongly
recommended and should be used whenever the machine is
operating. The machine has a special outlet for connecting
an external dust extraction system or an industrial vacuum
cleaner. It is recommended to connect an external dust
extraction source in such a way that it starts up each time the
machine is started.
• A connector with a 4-inch (10 cm) adapter is required to
connect an external suction system.
e) FIXING TO THE FLOOR
When the machine is used permanently in the same place, it can
be fixed to the ground for stabilization using the attached
brackets and leg screws. One bracket for each leg - arrange the
mounting elements on your own.
EN
Publicidad
