Publicidad
Idiomas disponibles
Idiomas disponibles
The material being
cut is thrown away
from the blade
The cutting disc
cannot be tilted
smoothly
The blade does not
accelerate to
operating speed
The machine
vibrates strongly
supply of the element
to be cut
a.
Unevenly clamped
riving knife
b.
The riving knife is not
in line with the blade
c.
No riving knife is
attached
d.
The cut element is
released too early by
the operator, as a
result of which it is
not completely cut
e.
Blade is worn out
Dirty tilt mechanism from
clippings
Extension cable too long
a.
The machine is not
standing steadily on
the surface.
b.
Damaged cutting disc.
EN
e.
a.
b.
c.
d.
e.
Clean the tilting mechanism
Use a shorter extension cable
a. Level the machine or
b. Replace defective cutting
Clean the worktop - for
a better, smooth
surface, it can be
waxed
Align the riving knife
Install and align the
riving knife to the blade
Attach the riving knife
Improve the technique
of working with the cut
element
Replace the cutting disc
place it in another, level
place
disc
Publicidad
