Nuna Swiv Manual De Instrucciones página 9

Product Information
Model Number:
___________________________________________________
Manufactured Date:
________________________________________________
Warranty
We have purposely designed our high-quality products so that
they can grow with both your child and your family. Because we
stand by our product, our gear is covered by a custom warranty
per product, starting from the day it was purchased. Please have
the proof of purchase, model number and manufactured date
available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the "Warranty" link on the homepage.
Contact
For replacement parts, service, or additional warranty questions,
please contact our customer service department.
info@nunababy.com
www.nunababy.com
NUNA International B.V.
Van der Valk Boumanweg 178 C
2352JD Leiderdorp
The Netherlands
Child Usage Requirements
This stroller is suitable for use with children who meet the
following requirements:
Birth to 22 kg or 4 years whichever comes first.
When using the stroller frame with a NUNA infant carrier, refer
to the child usage requirements listed in the infant carrier
instruction manual.
Product Set Up
Open Stroller
1
- Lift the handle to open the stroller frame. (1)
2
- A "click" sound means the stroller is fully opened. (2)
3
- Pull the seat to open it. A "click" sound means the seat is
open. (3)
Insert
1
- Release the buckle to assemble the insert, place the insert
over the seat pad and thread the shoulder, waist and crotch
harness straps through their respective slots. (4)
Reverse Seat
1
- Press the seat release button (5) and lift the seat up (6).
2
- Reverse the seat, and then attach it to the frame. (7)
A "click" sound means the seat is attached completely.
The parking brake MUST be engaged when the stroller
is stopped and when placing and removing child.
3 SWIV instructions
Arm Bar
It is always recommended that the arm bar be used, but it
is not a restraint device. Always secure the child with the
harness.
1
- Align the arm bar ends with the arm bar mounts, and insert
until it clicks into place. A "click" sound means the arm bar
is assembled completely. (8)
2
- To remove the arm bar, press the arm bar release buttons
(9)-1 and lift the arm bar up (9)-2.
Product Use
Canopy
1
- To open the canopy, pull the canopy toward the front of the
seat. To close the canopy, push it back. (10)
2
- Unzip the zipper for extra shade. (11)
3
- For added ventilation, flip the canopy window cover up.
(12)
Calf Support
The calf support has 2 use positions.
1
- To raise the calf support, lift up. (13)
2
- To lower calf support, press the adjustment button, and
push down. (14)
Recline
There are 3 recline positions for the backrest.
1
- To raise or lower the backrest, squeeze the recline
adjustment button (15)-1, and pull the backrest up or down
(15)-2.
Please do not press the button (16) on the middle of the
recline adjustment button when adjusting the angle for the
recline.
USE the most reclined position for new born babies.
Brake
1
- To lock wheels, step the brake lever downwards. (17)
2
- To release wheels, just lift the brake lever upwards. (18)
Storage Pocket
1
- Use the storage pocket on the back of the seat for
lightweight storage. (19)
To prevent a hazardous, unstable condition, DO NOT place
more than 0.45 kg of items in the storage pocket.
Use Drift
1
- Press the drift button, All wheels of the stroller can be
rotated. (20)
Please be sure to push the stroller forward for a distance
to make wheels return to locked state after use drift, then
stroller can be used normally.
Securing Your Child
1
- Push the top button on the buckle to release the buckle
latch and remove the magnetic clips. (21).
Place your child in the stroller.
2
- Insert the magnetic clips into the buckle. (22)
3
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten (23)-1. Then pull the waist
adjustment straps out. (23)-2
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up and
down for added adjustment. (24)
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
Make sure the harness is adjusted properly and your child
is snugly secured. The space between the child and the
shoulder harness should be about the thickness of one
finger. DO NOT cross the shoulder belts. This will cause
pressure on your child's neck.
Shoulder Harness Cover and
Crotch Harness Cover
1
- The shoulder harness cover & crotch harness cover can be
removed from the webbing. (25)
To assemble shoulder harness cover and crotch harness
cover in reverse steps.
Adjust Handle
Handle can be adjusted to 3 positions.
1
- To adjust the handle, press the left and right handle
adjustment buttons at the same time, and rotate the handle
to a desirable position. (26)
2
- Before folding the stroller, please adjust the handle to the
second position. The stroller can stand after folding. (27)
Fold
With Seat Attached
Close the canopy.
1
- Press the fold button on the middle of the recline
adjustment button, then pull the recline adjustment button.
(28)
2
- Fold the seat down. (29)(30)
3
- Pull the stroller fold strap to fold the stroller. (31)(32)
4
- The stroller can stand after folded. (33)(34)
Without Seat Attached
1
- Fold the stroller without seat on it, press the folding
buttons of the seat mounts. (35)
2
- The stroller frame can stand after folded. (36)
Accessories
Post Adapters
For Nuna infant carrier, LYTL and TRIV series carry cot assembly
and usage, please refer to the infant carrier and carry cot
instruction manual.
1
- To attach the post adapters, place the post adapters on the
seat mounts. A "click" sound means the post adapters are
attached. (37)
2
- To attach infant carrier, place the infant carrier on the
post adapters. A "click" sound means the infant carrier is
attached. (38)
3
- To attach carry cot, place the carry cot on the post
adapters. A "click" sound means the carry cot is attached.
(39)
4
- The infant carrier and carry cot angle can be adjusted with
our adjustable adaptors. (40)
5
- When used with rear facing, the letters on the post
adaptors are the same as those on the frame plastic. (41)
(42)
6
- When used with front facing, the letters on the post
adaptors are opposite to those on the frame plastic. (43)
(44)
7
- To remove the infant carrier, push the release buttons on
the infant carrier (45) and lift up (46).
8
- To remove carry cot, press the release buttons on the side
of the carry cot (47)-1 and lift up (47)-2.
9
- To remove the post adapters, press the adapter release
buttons (48)-1 and lift up (48)-2.
Fold the Stroller with Post Adapters
1
- Pull the folding webbing of the post adapters to fold the
stroller. (49)
Cup Holder
1
- To attach the cup holder, secure the right side of the cup
holder clamp around the stroller handle, handle just below
the leatherette pushbar. (50)
2
- Rotate the left side of the clamp over the pushbar handle.
(51)
3
- Push the two pieces of the clamp together and listen for a
"click". A "click" sound means the cup holder is securely
attached. (52)
4
- To remove the cup holder, push apart the two pieces of the
clamp and remove the cup holder from the pushbar (53).
Remove the cup holder before folding the stroller.
Travel Bag
1
- Place the folded stroller into the bag with the wheels at the
bottom, and close the bag by tightening the drawstring.
The bag can be carried by the carry strap. (54)
SWIV instructions 4