Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
Before using the
carpet cleaner, use a vacuum to
remove loose dirt from area to
be cleaned. Test a small hidden
area for colorfastness. Gently rub
surface with a dampened white
cloth. Wait 10 minutes and check
for color removal with a white
paper towel. If color changes, do
not use.
NOTE:
To prevent staining,
use plastic or aluminum foil to
protect wood or metal surfaces
from possible water spray.
To protect the wood floors
underneath rugs or carpet, place
waterproof material (e.g. plastic)
underneath them before cleaning.
CAUTION
Moving parts! To reduce the
risk of personal injury, DO NOT
touch the brushrolls when the
carpet cleaner is on. Contacting
brushrolls while they are
rotating can cut, bruise or
cause other injuries. Disconnect
electrical supply before servicing
or cleaning the carpet cleaner.
Use caution when operating
near children or pets.
1. Turn the upper cord hook to
either side and down to release
the power cord.
USING THE CARPET CLEANER
2. Detach the power cord plug
from the power cord.
3. Be sure the power cord is
locked into the upper locking
notch as shown. This will help
manage the power cord when
operating the carpet cleaner.
4. Plug the power cord into a
properly grounded outlet
located near the floor.
- 12 -
Upper Cord
Hook
Upper
Locking
Notch
Publicidad
