Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Do not allow the carpet cleaner
to remain in one spot for
any length of time when the
brushrolls are turning. Damage
to carpet may occur.
NOTE:
Do not over-saturate
carpet. Be careful not to run over
loose objects or edges of area
rugs. Stalling the brushrolls may
result in premature belt failure.
USING THE CARPET CLEANER WITH HOSE & TOOL
1. Place the carpet cleaner in the
upright locked position.
2. Open the flexible hose door.
The door flips toward the nozzle
cover to open.
3. Insert the flexible hose as
shown. Make sure the two hose
release clips are locked into
place. The cleaning solution
delivery tube is suggested to
face upwards.
USING THE CARPET CLEANER
Flexible
Hose
Door
9. Empty the dirty water tank
when the dirty liquid reaches
the "Max Fill" line and there is a
loss in suction. See instructions
in the EMPTYING DIRTY WATER
TANK (page 16-17).
10. Once you have completed
cleaning, push the power
button again to turn the carpet
cleaner off; unplug the power
cord from the power outlet.
4. Connect the end of the
cleaning solution delivery
tube to the cleaning solution
outlet on the nozzle and turn
clockwise to secure as shown.
- 14 -
Hose
Release
Clips
Publicidad
