Publicidad
Janome 639X Instruction Manual
1
3
4
2
5
1
1
2
3
4
5
2
www.toews.com
Threading the Machine
• Threading the machine
* Place a spool on the spool pin, with thread
coming off as shown.
* Raise the thread take-up lever to its highest
position by turning the handwheel counter-
clockwise.
* Raise the presser foot.
Draw the end of thread around the thread
1
guide.
Thread guide
1
While holding the thread near the spool, draw
2
the end of the thread down along the right
channel and around the bottom of the guide
plate.
Firmly draw the thread up along the left
3
channel. Slip the thread into the slit of the
thread take-up lever from right to left and
down into the take-up lever eye.
4
Slide the thread behind the needle bar thread
guide on the left.
Needle bar thread guide
2
Thread the needle from front to back.
5
16
639X Owners Manual/ User Guide
Publicidad
