Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
10.4 Error codes and flashing sequences
Error and flashing codes
Battery symbol ( )
Antenna symbol
flashing ( )
Lock symbol ( )
Short orange flashing
1x long green lighting
Short orange flashing
(every 10 seconds)
Short orange lighting
(after green or red
confirmation)
1x long red lighting
6x long red flashing
1x orange and 1 x green
lighting (after inserting
batteries)
Meaning
Battery voltage too low
Communication problem
with the Homematic IP
Access Point or connect-
ed device
Operating lock activated
Radio transmission/
attempting to transmit/
data transmission
Operation confirmed
Pairing mode active
Batteries empty
Transmission failed or
duty cycle limit is reached
Device defective
Test display
Solution
Replace the batteries of
the device
(see „9 Repla-
cing batteries" on page
35).
Please check the
connection with the
Homematic IP Access
Point or the connected
devices.
Deactivate the operating
lock via the app or the
menu.
Wait until the transmission
is completed.
You can continue
operation.
Please enter the last four
numbers of the device
serial number for con-
firmation
(see „6.1 Direct
pairing" on page
Replace the batteries
„9 Replacing batteries" on
page
35).
Please try again
(see „10.2
Command not confirmed"
on page 36)
or
(see
„10.3 Duty Cycle" on page
36).
Have a look at your app
for error message or
contact your retailer.
After the test display
has stopped, you can
continue.
26).
(see
37
Publicidad
