Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE The console lid should remain open
during the preinstallation and installation pro-
cedures.
This section describes the assessment and location
preparations to install the refrigerator.
7.1
Assessing the installation location
1.
Confirm your vehicle is the correct model, model
year, and trim level to accept the refrigerator. See
Specifications
on page 6 for more information.
Only trim packages with an integrated center floor
console are eligible.
2. Verify you have the correct parts and tools to per-
form the refrigerator installation. See
terials
on page 4 for more information.
7.2
Removing the console back panel
1.
Remove the cupholder screw.
2
① Cupholder
2. Remove the rubber mat from the bottom of the
cupholder.
3. Use a 7 mm socket wrench to remove the screw.
Tools and ma
1
② Screw
Center Console Refrigerator EN
1
① Console back panel
4. Use a panel removal tool or a thin flat object to pry
off the console back panel, taking care not to strain
the internal electrical connections.
① Electrical connec-
② Gray power connec-
tions
tor
5. Unplug the gray power connector from 12 V sock-
et.
2
② Panel removal tool
1
2
3
③ 12 V socket
7
Publicidad
