Publicidad
Idiomas disponibles
Idiomas disponibles
3. Confirm the blue LED is illuminated on the refrigera-
tor unit's ON/OFF button. If not, press the button.
4. Listen for the condenser fan to start. See
bleshooting
on page 12 if the condenser fan
does not start.
5. Press the ON/OFF button to turn the refrigerator
unit OFF.
6. Turn the vehicle engine off.
7.
Unplug the 12 V power cable.
8. Set the refrigerator unit away from the console.
8 Installation
WARNING! FIRE HAZARD
Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
NOTICE!
• Do not leave the refrigerator unit in an
inverted position or run the compres-
sor soon after having the refrigerator in
an inverted position. Otherwise dam-
age to the compressor could occur.
• Avoid pinching, crushing, or breaking
the wires or power cable. Otherwise
damage to the refrigerator unit could
occur.
This section describes how to install the refrigerator unit
and to reinstall the console back panel and cupholders.
8.1
Installing the front fan
Trou
① Fan
② Wiring
1.
Insert the fan into the opening with the wiring lead-
ing upwards.
2. Tape the wiring to the top of the console so it will
be out of the way when installing the refrigerator.
8.2
cover
① Locking tabs
② Screw
Center Console Refrigerator EN
3
2
③ Tape
Removing the console lid bottom
1
3
2
③ Panel removal tool
1
9
Publicidad
