Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
PREP THE ROBOT
Side Brush
• Remove protective film from robot and dock.
• Attach side brush.
STEP 3
CHARGING YOUR ROBOT
6
h
First
Charge
• Place robot on base to charge for 6 hours.
• Make sure the robot is properly aligned on the base.
• TO TURN ON ROBOT: Place robot on base or press
and hold the CLEAN
button for 5 to 7 seconds
until the indicator lights turn on.
CAN'T CONNECT TO WI-FI?
Restart your phone
• Turn off phone, wait a few minutes, then turn it back on
and connect to Wi-Fi.
Reboot your robot
• Take robot off dock and press and hold down the
CLEAN button on the robot for 12 seconds. Turn your
robot back on by placing it on the dock.
Reboot your router
• Unplug the router power cable for 30 seconds, then
plug it back in. Allow several minutes for your router to
reboot completely.
sh arkc le a n.eu
SETUP
STEP 2
SET UP THE SELF-EMPTY BASE
Place base
on bare floor
against the
wall.
0.3m
0.3m
0.6m
• Find a permanent location for the base in a central
area with a strong Wi-Fi signal.
• Remove any objects that are closer than 1m. from either
side of the base, or closer than 1.5m. from the front.
• Plug in the base.
STEP 4
DOWNLOAD THE APP
SharkClean
App Features
Precision Home Mapping
✔
Room Select
✔
Spot Cleaning
✔
No Go Zones
✔
Scheduling
✔
Search "SharkClean" in the app store or scan the QR
code on the front cover to download the app.
Questions? Steps if You're Stuck:
Having trouble connecting to your robot?
For how-to videos, FAQs, troubleshooting, and tips &
tricks visit: sharkclean.eu.
For full instruction booklet visit: qr.sharkclean.com/
RV2820UK
SCAN HERE USING YOUR SMARTPHONE CAMERA
• To use the app, your phone must be
connected to a 2.4 GHz network. The app
will not work on a 5 GHz network.
• DO NOT use a VPN or a proxy server.
• Make sure Wi-Fi isolation is turned off on the router.
BEFORE YOU CLEAN
Your robot will need to complete an Explore Run to
create a map of your home.
In the Explore Run, your robot will wander around
your home as it creates a map.
After this run, you can create No-Go Zones in the
areas of your home that you want to the robot to
avoid while mopping. If you do not want to set up
No-Go Zones, you can skip this step.
Now you're ready to clean.
CLEANING ROBOT'S FILTER
IMPORTANT - Clean filter every month or loss of
suction may occur.
Rinse and let air dry completely. Also, tap loose dirt
off filter between washes as needed.
Foam filter
Felt filter
Foam filters may appear dirty after use–this is normal.
DO NOT put your hands into any
opening not defined for user access
INTERACTIVE MAP WITH NO-GO ZONES
s ha rkc lea n.eu
Publicidad
