Publicidad
Idiomas disponibles
Idiomas disponibles
III.
INSTALLATION AND OPERATIONS
EN
INSTRUCTIONS
The appliance is intended only for on-floor operation
(horizontal flat surface)!
1.
Mounting
1.1.
Before operating the portable electric convector heater
you should install its feet. The feet should be installed at the
base of the portable electric convector heater by means of 2
screws to each of them. Make sure that the feet are properly
aligned at the two sides of the portable electric convector
heater.
1.2.
Take out the set of 2 screws and attach the feet by
screwing the screws with a proper extra tool (screw-driver),
which is not included in appliance set. (fig. 2)
2.
Operation
2.1.
It is compulsory for the appliance to be secured when
positioned in a room without supervision. The appliance
electric installation has to be equipped with an automatic
safety fuse; with a distance between its contacts in
disconnected state of at least 3 mm.
2.2.
Select a proper place for the appliance, taking into
account the safety precautions. (fig. 3)
2.3.
Set the portable electric convector heater in proper
working position before connecting it to the mains.
2.4.
Plug mains plug into a wall socket that complies with
the technical date 220-240V ~50-60Hz.
2.5.
During initial operation or when the appliance has not
been used for a long period of time, subtle odour or smoke
may be emitted, it will disappear in a short period of time
during appliance operation.
2.6.
The appliance is equipped with a double power switch
with three positions
•
0- OFF
•
"I" for 1000W
•
''II" for 2000W
•
The total maximum power when both power switches
are turned-on is 2000W (If the "Turbo" function is working
the light indeator lights up In red ). (fig. 4 - 1)
2.7.
The appliance is equipped with thermo-regulator
sensitive to ambient temperature. You can turn the thermo-
regulator knob until the desired room temperature is
achieved (the size of the heated room has to conform
to the power of the appliance; in case the desired room
temperature can't be achieved, an additional portable
electric convector heater needs to be operated). You can
turn the thermostat knob clockwise to maximum power and
when the desired room temperature is achieved you have
to turn it counter-clockwise slowly. This is аccompanied
with a sound signal. Then the appliance will maintain the air
temperature in the room at the adjusted level by switching
on and off automatically. (fig. 4 - 2)
2.8.
You can turn the thermostat clockwise to the maximum
value, once it reaches the desired room temperature,
you should slowly turn the thermostat anti-clockwise.
The selection of the maximum temperature value is
accompanied by a sound signal. The unit will then maintain
the air temperature in the room at the set level by switching
on and off automatically.
2.9.
TESY Portable electric convector heater CN 207 ZF W/
6
Usage and Storage Instructions
CN 207 ZF G/ CN 207 ZF W is equipped with an additional
Turbo function, which can be controlled by a separate
switch – (Turbo). Turbo function assists portable electric
convector heater in faster achievement of desired room
temperature. When the appliance is connected, press the
TURBO button once to switch on the function. Then the
TURBO indicator lights up in red. Press the TURBO button
again to switch off the function. The indicator lights off. (fig.
4 - 3)
2.10.
The available power levels are presented
indicatively.
Note: The device shows the temperature around the
location of the sensor and is not a means of accurately
measuring the ambient temperature.
MOVING THE APPLIANCE:
IV.
If the appliance has to be moved, switch it off by the portable
electric convector heater switch. Take the power plug out of
the power socket and then, holding the appliance handles
with both hands, move it to its new position, having in mind
that the appliance must get cold (cooled down) before
doing this. Moving hot appliances may lead to undesired
consequences for the user like burns or inflammable
materials entering the portable electric convector heater
during its movement.
CLEANING
V.
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before starting
cleaning the portable electric convector heater you should
wait until it cools down after disconnecting it from the
power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is danger
to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive products for
cleaning because they will damage the surface coating of
the appliance.
VI.
STORAGE
•
Before putting away the portable electric convector
heater let it cool down after disconnecting it from the
power socket. Use the original packing for storing the
portable electric convector heater if it will not be used for a
certain period of time. The product can be protected from
excessive dust and dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product has to be stored at a dry place away from
direct sunlight.
•
It is explicitly forbidden to store the appliance in wet or
damp premises.
Environment protection instructions
Old electric appliances contain valuable
materials and therefore should not be
disposed of as domestic waste! We ask you
for your active cooperation to protect the
resources and the environment by submitting
your appliance to organized buy-back stations
(if there are such).
Publicidad
