Arkray GLUCOCARD Shine Connex Manual Del Usuario página 26

Setting the Test Strip Expiration Date Indicator
Step 1 Entering the Expiration Date Setting
Press and hold the < and > buttons at the same time for three
seconds to enter the expiration date settings. After all segments
flash across the screen, 'EP' will show up.
NOTE
• The test strip expiration date is printed on the test strip vial.
Step 2 Setting the Expiration Year
A number indicating the year will blink in the
left corner of the screen.
Press the < or > button until the correct
year appears.
Press the button to confirm the year and
go to the next step.
Step 3 Setting the Expiration Month
A number indicating the month will blink at
the bottom of the screen.
Press the < or > button until the correct
month appears.
After setting the month, press and hold the
button for three seconds to save your
setting and turn off the meter.
26 www.arkrayusa.com