Arkray GLUCOCARD Shine Connex Manual Del Usuario página 50

Caring for the GLUCOCARD Shine Connex System
• To minimize the risk of transmission of bloodborne pathogens,
the pre-cleaning and disinfection procedure should be
performed as recommended in the instructions below.
• Wash your hands thoroughly with soap and water after
handling the meter, lancing device or test strips.
• If the meter is being operated by a second person who is
providing testing assistance to the user, the meter and
lancing device should be disinfected prior to handling by
the second person.
• For the lancing device: For use only on a single person.
Disinfect reusable components according to manufacturer's
instructions between each use.
• Inspect the lancing device after cleaning. If residual blood,
debris, dust or lint remain, repeat the cleaning step. Do not
use the lancing device if it is not visually clean after several
repetitions of the cleaning step.
Pre-cleaning and Disinfection
The pre-cleaning procedure is needed to clean dirt as well as
blood and other body fluids on the exterior of the meter and
lancing device before performing the disinfection procedure.
The disinfection procedure is needed to prevent transmission of
bloodborne pathogens.
• For the meter and lancing device, this pre-cleaning and
disinfection procedure should be performed once a week.
50 www.arkrayusa.com