HIKOKI RP200SL Instrucciones De Manejo página 11

Alternating current
WARNING! The dust extractor may contain
hazardous dust.
Dust class L (light).
The dust extractors are capable of picking up
dust class L. Follow your country's regulations
relating to dusts and to occupational health and
safety.
Dust class M (medium).
The dust extractors are capable of picking up
dust class M. Follow your country's regulations
relating to dusts and to occupational health and
safety.
Dust class H (high).
The dust extractors are capable of picking up
dust class H. Follow your country's regulations
relating to dusts and to occupational health and
safety.
Switching ON
The dust extractor is switched on or off by
AUTO
means of a power tool connected to the mains
socket.
(RP200YL / RP300YL / RP300YM / RP300YH)
0
Switching OFF
Disconnect mains plug from electrical outlet
Warning
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 218.
Standard accessories are subject to change without notice.
MOUNTING AND OPERATION
Action
Inserting a fleece filter bag*
Inserting a PE disposal bag*
Inserting a special filter bag for
H-class* 3
Mount accessory fixtures for nozzles
and hose
Installing the suction hose
Removing and attaching the
connecting sleeve
Regulating the suction power*
Figure Page
1 2 2
2 3 3
4 3
5 4
6 4
7 4
4 8 4
Action
Switch operation
*1 We recommend using fleece filter bags for:
○ Applications, where small amounts of fine dust are
created (e.g. spot-grinding and grinding of paint and
lacquer coatings, extraction of drilling applications with
small diameters < 10 mm of short duration, etc.).
○ Use of machines, such as: routers, planers, small
grinding machines, etc.
NOTE
When using a fleece bag the filter cleaning is non-
functional.
*2 We recommend the use of PE-disposal bags for:
○ Applications, where larger amounts of dust are created
(e.g. removal of plaster surfaces, spot-grinding and
grinding of screeds, etc.).
○ Use of machines, such as e.g.: renovation milling
machines, renovation grinders, drywall grinders, wall
grinders etc.
*3 The special filter bag must be used in the case of
harmful dust.
*4 By turning the auxiliary air slide the air supply on the air
intake and thus the suction power can be regulated.
PRIOR TO OPERATION
WARNING
Before commissioning, check that the rated mains
voltage and mains frequency stated on the nameplate
match your power supply.
THE DEVICE
1. PressClean (Fig. 10)
To clean the filter using a strong air flow:
Turn the swith on, cover the nozzle or suction opening
with the hand and press the button several times (at
least 3 times).
2. Power socket (Fig. 11) (RP200YL / RP300YL /
RP300YM / RP300YH)
WARNING
○ The power socket is designed for connection to a power
tool only.
○ The total maximum permissible current consumption (of
dust extractor and connected power tool) must not
exceed the value "Max. current consumption" (see
"SPECIFICATIONS").
If the switch is in the "AUTO" position, the dust extractor is
switched on or off by means of a power tool connected to
the power socket.
3. Volume flow control display (Fig. 12) ( RP300YM /
RP300YH)
Lights up red when the required volume flow of 20 m/sec is
not achieved.
The volume flow control display lights up and there is an
additional acoustic signal when the container is full and/or if
the suction hose is blocked. See "TROUBLESHOOTING"
USE
1. Dry Vacuuming
○ Vacuum using a dry filter, dry device and dry
accessories only. If the cartridge is damp, dust may
stick and form a crust.
○ Always use fleece filter bag or PE disposal bag together
with pleated filter.
11
English
Figure Page
9 4