HIKOKI N 1810DA Instrucciones De Manejo página 9

9 Hook
10 Motor
11 Battery
12 Handle
13 Staple strip
14 Latch
15 Pilot lamp
16 Blade guide
17 Remaining battery indicator switch
18 Remaining battery indicator lamp
19 Display panel
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
N1810DA / N1812DA: Cordless Stapler
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Direct current
Switching ON
0
Switching OFF
Disconnect the battery
Trigger locked
Trigger unlocked
Do not use on scaffoldings, ladders.
Warning
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
SPECIFICATIONS
1. Power tool
Model
Motor
Staple Loading capacity
Weight* 1
Dimension* 2
Length × Width × Height
*1 Weight: According to EPTA-Procedure 01/2014
Depending on attached battery. The heaviest weight is
measured with BSL36B18X (sold separately).
*2 Dimension: The battery BSL36A18X is included
2. Applicable staple
The staples indicated in the chart below can be used
with this stapler.
150 staples are bonded together to form a strip.
Contact the dealer from which you purchased the
stapler for details on obtaining the staples.
NOTE
Only staples manufactured by HiKOKI may be used.
Staples other than those manufactured by HiKOKI may
cause jamming and subsequent malfunctions.
9
English
N1810DA / N1812DA
DC motor
150 staples
1.5 kg (BSL1820M)
2.2 kg (BSL36B18X)
166 mm × 85 mm ×
235 mm