Baker Hughes Druck ADTS542F Instrucciones De Seguridad E Instalación página 10

3. ADTS542F/552F/553F/554F
6
Note: See Figure 8 for other variants.
3.1 Power-Up Test (see Figure 6)
1. Fit "Pitot" (Pt) (1) and "Static" (Ps) (2) port blanks.
2. Ensure that the test set is connected to an external power supply and the supply is switched
on.
3. Use the On/Standby Switch (3) on the front of the test set to switch the test set on. The test
set performs a self test, resulting in a test set status indication (4a) "Pass" or "Fault".
Copyright 2014 Baker Hughes Company.
8 | ADTS542F/552F/553F/554F Safety and Installation Guide–English
1
3
Figure 6: ADTS542F Front Panel
2
5 8
4
7