Gardena 1285 Instrucciones De Empleo página 10

4.1.2 Manual Control:
Permanent water flow, independent of the time
control.
v Set the selection lever
4.2 Factory Reset [ Fig. F1 / I1 ]:
The Irrigation Valve 9 V Bluetooth
the factory settings.
5 . MAINTENANCE
5.1 To clean the Irrigation Valve:
DANGER!
Risk of injury and risk of damage to the
product.
v Do not clean the product with water or
with a water jet (in particular high-pres-
sure water jet).
10
GAR_01285-63.960.02_2024-04-25.indb 10 GAR_01285-63.960.02_2024-04-25.indb 10
(13) to ON.
will be reset to
®
Risk of physical injury!
1. Remove the battery (B)
2. Push and hold the Man. Button
(B)
the battery in the battery compartment
(note the polarity + / –).
3. Push and hold the Man. Button
10 seconds.
After approx. 10 seconds the factory setting is
restored and the connection LED is flashing.
v Do not clean with chemicals including
petrol or solvents. Some can destroy
critical plastic parts.
v Clean the Irrigation Valve with a soft, damp cloth.
.
(4)
and place
(5)
(4)
for another
25.04.24 09:03 25.04.24 09:03