Cameo F2 FC PLUS Manual De Usuario página 22

22
LED PWM
=
frequency
= Colour calibration
Automatic locking
=
of the controls
= Fan setting
Set LED PWM frequency
R, G, B, A and L
(maximum value: 255)
Press the centre encoder = switch
RAW - Adjust
between R+G, B+A and L (colour)
(individual
Turn the centre encoder = set the
adjustment of
value of R, B or L
R, G, B, A and
L with values
Press the right encoder = Move
from 000 to
up one level in the menu structure
255, across all
(ESC) Turn the right encoder = set
modes)
the value of G or A
Factory calibration of R, G, B, A and
L (across all modes). Select this set-
ting to correctly display the colour
tones and presets in the CCT and
Gel stand-alone modes and when
controlling CCT and the Gel presets
via DMX.
Merging of factory (calibrated) and
RAW calibration
Automatic locking of the controls
after approximately 30 seconds
of inactivity. If the controls are
operated while locked, the display
shows "Locked!" To unlock, press
the centre and right encoders simul-
taneously for approx. 3 seconds
Automatic locking of the controls
disabled
Automatic fan control
Deactivated fan with greatly re-
duced brightness
Constant low fan speed with re-
duced brightness, if necessary
Constant medium fan speed with
reduced brightness, if necessary
Constant high fan speed