Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Stain Level / Rapid function
•
See the table above for the available programs that can be selected for each function.
•
These functions allow you to choose differing levels of wash for intense staining, or to freshen up clothes
quickly if short of time.
Adjusting the Temperature Selection
•
See the table above for the temperature range of each program.
•
To use a program as a cold wash, ensure none of the temperature indicators are lit.
Adjusting the Spin Speed
•
After selecting the wash program, you can adjust the spin speed to a lower level if indicated on the fabric
care label.
•
This adjustment can also be made without pausing the wash program if already underway.
NOTE:
1. Using too much detergent can cause excessive foaming which can affect the operation of the spin
phase, extend the duration of the wash program and increase water consumption.
2. The spin cycle can be affected if the load becomes unbalanced, and the machine will adjust the program
to reduce noise and vibration.
Using the Panel Lock function
•
To activate the Panel Lock function press the Temperature Selection and Spin Speed selection buttons
together for three seconds.
•
To cancel the lock function, repeat this procedure or turn the Program selector dial to off.
FR Fonctions et réglages
Mise à niveau de la machine
À l'aide d'un niveau à bulle, vérifier que l'appareil est stable et à plat et qu'il ne bascule pas. Tourner le
contre-écrou A dans le sens horaire pour le desserrer. Faire tourner le pied selon les besoins et serrer à
nouveau le contre-écrou A sur la base de l'appareil.
5059340794501_MNL_IN_V09.indb 75
5059340794501_MNL_IN_V09.indb 75
A
17 mm
75
09-08-2023 13:08:07
09-08-2023 13:08:07
Publicidad
