GUTMANN 67201480 Instrucciones De Uso página 20

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
en
Untimely cleaning of the surface saves later
a troublesome removing of stubborn soiling.
For the cleaning use only commercial
detergent or all-purpose cleaners which are
suitable for stainless steel / aluminium.
Please do not use scouring agents or steel
wool! After the cleaning of the extractor hood
please tend the stainless steel surfaces with
a highgrade steelcare product.
Only with a light soapy water and a very soft
cloth varnished surfaces have to be cleaned.
Please clean the glass front with a
commercial glass cleaner and wipe with a soft
cloth.
Exchange and cleaning of the
filter
Fire risk! The performance of the extractor
hood is affected by containing fat remains and
therefore the fire risk increases. To prevent a
fire risk please clean the metal filter regularly.
Hold the metal grease filter with both hands
at its grip and pull downwards as far as the
magnet contact comes off. The filter can be
taken out now. The installation is made in
reverse order.
The metal grease filter is to be cleaned at
best in a dishwasher or in hot soapy water.
Aggressive cleaners should not be used. The
guarantee can´t be applied if a discolouring
on the filter is a result of using an aggressive
dishwashing
liquid.
temperatures over 65 degrees.
Attention: do not use 3-phase-cleaners or
Please
avoid
clean the filter in a commercial dishwasher.
The use of aggressive cleaners like fuel,
acetone, trichlorethylene destroys the filter!
Reinstate the
metal filter after the cleaning.
Exchange of the active carbon
filter
(only extractor hoods with circular
air – version D)
Active carbon filters bundle up odorous
substances which are contained in the kitchen
fume. According to the strain of work this filter
has to be exchanged after 3-6 months.
-
take out of the metal grease filter
(downwards)
-
loosen and remove the knurled-head
screws (a)
-
take out of the filter element (b)
(downwards)
-
press the catch in the direction of the
arrow and
c
b
-
flap down the filter frame
-
exchange of the active carbon filter (c)
-
turn up the filter frame and secure
a

Publicidad

Tabla de contenido
loading

Tabla de contenido