Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Exchange of the lighting
Replace faulty lights through new ones
immediately.
After the removal of the filters loosen and
remove the knurled-head screws. The filter
element can be taken out downwards
lighting is now freely accessible.
of the neon lamp is only possible if the
fluorescent lamp is turned at 90 degree
before.
The installation is made in reverse
order.
Dysfunctions
Please refer to our customer service if
-
the extractor hood produces too much
undefined noise and the control of the
exhaust air path reveils no faults;
-
the supercharger works faulty;
-
the circuit operates invalid.
Please indicate your type of extractor hood
and the series number. These informations
are mentioned on the type sheet which is
situated inside the hood on the filter.
Disposal
Packaging
The packaging of the appliance is recyclable.
It is made up off cardboard and polyethylene
The
.
foil (PE). Please dispose these materials in
Taking out
a environmentally aware, responsible way
and in accordance with the regulations of your
local authority.
Extractor hood
Your local community will be able to advise
you on an environmentally compatible
disposal of sorted out household appliances.
Enviromental Information
This appliance is labelled in accordance with
European Directive 2002/96/EG conceming
used electrical and electronic appliances
(waste electrical and eleclronic equipment -
WEEE). The guideline determines the
framework for the return and recycling of used
appliances as applicable throughout the EU.
Please ask your dealer about current means
of disposal.

Technical data

Connection mains:
230 V / 50 Hz, max. 500 Watt Lighting:
-Neon lamp, Narwa coolwhite 15W
with 1200 hood length 16W
-Energy-saving lamp Osram lm 11W
en

Publicidad

Tabla de contenido
loading

Tabla de contenido