Publicidad
Idiomas disponibles
Idiomas disponibles
4. CLEANING AND MAINTENANCE
4.1 GENERAL CLEANING
▌
CLEANING OF THE DEVICE
Clean the outside of the device with care using a soft and wet cloth or a sponge.
IMPORTANT:
•
Do not use aggressive products such as bleaches or ammonia. Use only neutral product.
•
Do not pull or push the nozzle manually. To remove it see section 4.1.2
•
Do not spray the water or the air outlets with water or cleaning agents that may enter inside the Multiclean M4.
4.1.1 LIMPIEZA ENTRE LA PORCELANA Y LA SUPERFICIE DEL MULTICLEAN 4
4.1.2 NOZZLE CLEANING
MANUAL NOZZLE CLEAN
Press oscillating wash button for 3 seconds, nozzle reaches out automatically
which will be remained for 5 minute. To stop this function in advance, please
press knob button.
NOZZLE AUTO CLEAN
Deep nozzle auto clean process is executed automatically after exiting manual
nozzle clean mode.
Do not use aggressive product to clean. Only use neutral product for cleaning.
Do not pull or push the nozzle manually.
It is forbidden to take out nozzle by hand directly.
Hard
Cl
El Multiclean M4 va fijado por un clip y unos imanes. Se puede
desacoplar la fijación de los imanes si se levanta el equipo, pero
manteniendo la fijación del bracket. Realizando este paso, se puede
limpiar la superficie.
neutral
soft
25
3s
Publicidad
