Publicidad
Idiomas disponibles
Idiomas disponibles
a serious hazard to the user and result in
damage to the device. The operator or
user of the machine is responsible for any
accidents or personal injury and/or mater-
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Electric Hedge Trimmer
• Blade encasing (11)
• Translation of the original instructions
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Stop protection
2 Safety cutter bar
3 Hand protection
4 Security switch
5 Front handle
6 Release
7 On/Off switch
8 Handle
9 Mains connection cable
10 Strain relief
11 Blade encasing
Fig. E
12 Keyhole
Description of functions
The device is powered by an electric
motor. The cutting unit of the device is a
double-sided safety cutter bar. During the
cutting process, the cutting teeth move
back and forth linearly. The stop guard
at the tip of the safety cutter bar prevents
unpleasant kickbacks when hitting walls,
fences, etc. Please refer to the descriptions
below for information on how the operat-
ing elements work.
Technical data
Electric Hedge Trimmer
...................................PHS 650 A1
Rated voltage U ......230–240 V∼, 50 Hz
Rated output P ................................ 650 W
Protection class ..⧈ II ( double insulation )
Protection type .....................................IPX0
Weight ......................................... ≈3.58 kg
Cutting movements ................... 2800 min
Cutting length ............................. ≈700 mm
Blade length (including stop protection)
......................................................≈780 mm
Blade tooth spacing ......................≈28 mm
Branch diameter ............................≤20 mm
Sound pressure level (L
...................................... 89.8 dB; K
Sound power level (L
– Guaranteed ................................ 100 dB
– Measured ......... 97.8 dB; K
Vibration (a
) ...............................................
h
– Handle ............. 1.31 m/s²; K=1.5 m/s²
– Front handle ..... 1.36 m/s²; K=1.5 m/s²
Levels of noise and vibration were determ-
ined according to the standards and regu-
lations in the declaration of conformity.
The specified total vibration value and the
stated noise emission value have been
measured according to a standardised
test method and can be used to compare
one power tool with another. The specified
GB
MT
)
pA
=3 dB
pA
) ............................
WA
=2,13 dB
WA
21
-1
Publicidad
