Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
cumstances, this field may negatively af-
fect active or passive medical implants.
In order to reduce the danger of serious
or fatal injuries, we recommend that indi-
viduals who wear medical implants should
consult their doctor and the manufacturer
of the implant before operating the ma-
chine.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Wall bracket
You can hang the motor part on the wall
with the keyhole (12) on the bottom of the
device.
Tools and aids required
• Screw (screw head: ⌀ 7–10 mm)
• Corresponding screwdriver
• Dowels, if necessary
Attaching the wall bracket
WARNING! Personal injury or dam-
age to property during drilling. Use suit-
able detectors to determine if
there are hidden supply lines or
contact the local utility company
for assistance. Contact with electric
cables can cause fire and electric shock.
Damaging gas lines can lead to explo-
sion. Breaking water pipes causes prop-
erty damage.
• Using dowels, place one screw at the
desired position on a wall.
• Let the screw head protrude with
approx. 40 mm distance to the wall.
• Make sure that the suspension system is
designed for the weight of the device.
• (Fig. E) You can place the device with
the keyhole (12) against the screw and
26
pull the device down as far as it will
go.
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• On/Off switch (7)
• Switching on: Press and hold togeth-
er with the safety switch (4).
• Switching off: Release the On/Off
switch (7) or the safety switch (4).
• Security switch (4)
Ensures two-handed operation.
• Release (6)
Pull the release (6) backwards to turn
the handle (8).
Operation
Working with the device
WARNING! Risk of injury! Pay atten-
tion to the following instructions.
WARNING! Risk of injury from
•
electric shock! Immediately pull out
the mains plug if the power cord (9) is
damaged, tangled or cut.
• NOTICE! Damage to the safety cutter
bar (2). While cutting, make sure that
you do not touch any objects, such as
wire fences or plant supports.
• Always wear sturdy shoes, long
trousers, ear protection, work gloves
and protective goggles when operating
the device.
• The device is only intended for work
where you are standing on the ground
and not on a ladder or other unstable
surface.
• The on/off switch and the safety switch
must not be locked. The motor must be
switched off when the switch has been
released.
Publicidad
